azerik
12-23-2004, 04:20 PM
Ok I don’t know what I am doing that will just got started and I am dyslexic so sorry for any miss spellings I am using Microsoft word and I spell so bad it does not work that good so sorry for miss spellings. Any way to the point I am trying to make this colloidal silver. I got a generated it is the RSG-3 Colloidal Silver Generator<?xml:namespace prefix = o ns = "urn:schemas-microsoft-com:office:office" /><o:p></o:p>
I hop I got a good one or at least a all rite one sine it cost me a 115 and I am a pore dog needing something for my ear infection I am hopping it will help me with it scents I am so pore I cant get to the doctor in time last time I got one I lost all most all my hearing in my left ear witch is why I am looking in to alternative options and trying to learn them scents I am entrusted in it for a crier. will here is my problem I put the guarantor in for 15 mints on the setting of 1mA what the instructions tell me to do for a ppm of 3-5 and I do want a ppm of 10 so I Figured can just leave it there longer and get more ppm don’t know if it works that way but any way I don’t know what my ppm is scents I don’t have the taster for it didn’t have the money to afford it but I read some were that you can use a laser pen to test it and I don’t know how that work for share. but here is what I think what you do. after you are done point it in to the water and the laser will show up in a the water do to the partials hating the laser and refitting the light to your eyes making you see a strait line of laser and this tells you there is silver in the water but I don’t know how mach it means is in there and wean I point the laser in my water I don’t get a line at all just tow dots from it hitting the glass. don’t know if I am supposed to may be leave it in there longer or what . I read some thing on this site that I didn’t understate that will about a Constant Current Generators making the silver so small that the laser won’t show up. And that is why I have need for insight on how this works and what I am doing wrong. Like will the laser show up in a ppm of 5 or lies at all? at what lever of ppm will the laser start to show up ?. Will a constant current really make the particles so small that it wont make the lease seen at all? Wean I am making the stuff my rod on one side starts to get gray and turn black. and I can see large particles of silver starting to form on the top near the rod and I read that this mite happen I thing you just tack the rod ought and clean it and then put it back in. but ones it has been In there for 10 minutes it tack no time at all for it to come back like 1 minutes or so. so should I just let it site there any way and late it form and hop it Does not fall off when I pull it oat. should I clean it any way? I read on this site that some ppl leave it in there for hours like 8 hours don’t know what there using and why my instructions say it just tack 15 mints to do it. tried to do a volt test to see if my generator was putting the volts out. Wean I did it the thing would test up to 30 volts with me just touching the electrodes out of the water but ones I put it in the water I would get hurdle any reading at all. so I figured the it is distilled water and wont conduct electricity will. so I figured all just put some salt in there and see what happen. One of the things I didn’t want to do is contaminate my rods but I need to figure out what it was putting out and I figured I could just clean them. So I put them in and got no reading at all and I got more of a reading with the salt out of it. but there was a reaction in no time at all like 6 secants. One of my rods turned yellow and was hard to clean off. the gray staff was easier to clean off then the yellow stuff these are my problems rite now and would appreciate any help I can get<o:p></o:p>
:smile:
I hop I got a good one or at least a all rite one sine it cost me a 115 and I am a pore dog needing something for my ear infection I am hopping it will help me with it scents I am so pore I cant get to the doctor in time last time I got one I lost all most all my hearing in my left ear witch is why I am looking in to alternative options and trying to learn them scents I am entrusted in it for a crier. will here is my problem I put the guarantor in for 15 mints on the setting of 1mA what the instructions tell me to do for a ppm of 3-5 and I do want a ppm of 10 so I Figured can just leave it there longer and get more ppm don’t know if it works that way but any way I don’t know what my ppm is scents I don’t have the taster for it didn’t have the money to afford it but I read some were that you can use a laser pen to test it and I don’t know how that work for share. but here is what I think what you do. after you are done point it in to the water and the laser will show up in a the water do to the partials hating the laser and refitting the light to your eyes making you see a strait line of laser and this tells you there is silver in the water but I don’t know how mach it means is in there and wean I point the laser in my water I don’t get a line at all just tow dots from it hitting the glass. don’t know if I am supposed to may be leave it in there longer or what . I read some thing on this site that I didn’t understate that will about a Constant Current Generators making the silver so small that the laser won’t show up. And that is why I have need for insight on how this works and what I am doing wrong. Like will the laser show up in a ppm of 5 or lies at all? at what lever of ppm will the laser start to show up ?. Will a constant current really make the particles so small that it wont make the lease seen at all? Wean I am making the stuff my rod on one side starts to get gray and turn black. and I can see large particles of silver starting to form on the top near the rod and I read that this mite happen I thing you just tack the rod ought and clean it and then put it back in. but ones it has been In there for 10 minutes it tack no time at all for it to come back like 1 minutes or so. so should I just let it site there any way and late it form and hop it Does not fall off when I pull it oat. should I clean it any way? I read on this site that some ppl leave it in there for hours like 8 hours don’t know what there using and why my instructions say it just tack 15 mints to do it. tried to do a volt test to see if my generator was putting the volts out. Wean I did it the thing would test up to 30 volts with me just touching the electrodes out of the water but ones I put it in the water I would get hurdle any reading at all. so I figured the it is distilled water and wont conduct electricity will. so I figured all just put some salt in there and see what happen. One of the things I didn’t want to do is contaminate my rods but I need to figure out what it was putting out and I figured I could just clean them. So I put them in and got no reading at all and I got more of a reading with the salt out of it. but there was a reaction in no time at all like 6 secants. One of my rods turned yellow and was hard to clean off. the gray staff was easier to clean off then the yellow stuff these are my problems rite now and would appreciate any help I can get<o:p></o:p>
:smile: